ITCertKing's training product for Juniper certification JN0-521 exam includes simulation test and the current examination. On Internet you can also see a few websites to provide you the relevant training, but after compare them with us, you will find that ITCertKing's training about Juniper certification JN0-521 exam not only have more pertinence for the exam and higher quality, but also more comprehensive content.
Now passing Juniper certification JN0-521 exam is not easy, so choosing a good training tool is a guarantee of success. ITCertKing will be the first time to provide you with exam information and exam practice questions and answers to let you be fully prepared to ensure 100% to pass Juniper certification JN0-521 exam. ITCertKing can not only allow you for the first time to participate in the Juniper certification JN0-521 exam to pass it successfully, but also help you save a lot of valuable time.
ITCertKing Juniper JN0-521 exam training materials can help you to come true your dreams. Because it contains all the questions of Juniper JN0-521 examination. With ITCertKing, you could throw yourself into the exam preparation completely. With high quality training materials by ITCertKing provided, you will certainly pass the exam. ITCertKing can give you a brighter future.
Why we are ahead of the other sites in the IT training industry? Because the information we provide have a wider coverage, higher quality, and the accuracy is also higher. So ITCertKing is not only the best choice for you to participate in the Juniper certification JN0-521 exam, but also the best protection for your success.
If you buy ITCertKing's Juniper certification JN0-521 exam practice questions and answers, you can not only pass Juniper certification JN0-521 exam, but also enjoy a year of free update service. If you fail your exam, ITCertKing will full refund to you. You can free download part of practice questions and answers about Juniper certification JN0-521 exam as a try to test the reliability of ITCertKing's products.
As long as you need the exam, we can update the Juniper certification JN0-521 exam training materials to meet your examination needs. ITCertKing's training materials contain many practice questions and answers about Juniper JN0-521 and they can 100% ensure you pass Juniper JN0-521 exam. With the training materials we provide, you can take a better preparation for the exam. And we will also provide you a year free update service.
In order to protect the vital interests of each IT certification exams candidate, ITCertKing provides high-quality Juniper JN0-521 exam training materials. This exam material is specially developed according to the needs of the candidates. It is researched by the IT experts of ITCertKing. Their struggle is not just to help you pass the exam, but also in order to let you have a better tomorrow.
Exam Code: JN0-521
Exam Name: Juniper (FWV.Associate (JNCIA-FWV))
One year free update, No help, Full refund!
Total Q&A: 119 Questions and Answers
Last Update: 2013-12-02
JN0-521 Free Demo Download: http://www.itcertking.com/JN0-521_exam.html
NO.1 In the command, save config from tftp 1.1.7.250 abcd.cfg merge, which function does the merge
parameter specify?
A.The config file from the TFTP server will replace the configuration in RAM.
B.The config file from the TFTP server will replace the startup configuration file in internal flash.
C.The merge parameter is not valid for TFTP files, it is only valid for configuration files stored in internal
flash.
D.The config file from the TFTP server will be combined with the configuration file in RAM and the
combined result will be saved in internal flash.
Answer: D
Juniper JN0-521 JN0-521 JN0-521 test
NO.2 When configuring a firewall in a critical environment where a local backup configuration is quickly
needed, what should be completed on a periodic basis?
A.Execute exec config rollback.
B.Execute save config to last-known-good.
C.Execute save regularly or create a script that does this.
D.Execute save software from flash to pcmcia .
Answer: B
Juniper JN0-521 original questions JN0-521 JN0-521 JN0-521 test JN0-521
NO.3 Which command would you run to check IPSec Phase 1 active status?
A.get sa
B.get event 427
C.get sa active
D.get ike cookie
Answer: D
Juniper certification JN0-521 JN0-521 exam prep JN0-521
NO.4 When performing an image upgrade using the CLI, which three locations would be a source for this
image? (Choose three.)
A.FTP server
B.TFTP server
C.internal flash
D.PC local disk
E.Compact Flash Card
Answer: BCE
Juniper pdf JN0-521 JN0-521 JN0-521 exam simulations JN0-521 braindump JN0-521
NO.5 Click the Exhibit button.
In the exhibit, which two forms of address translation would have generated the output shown? (Choose
two.)
A.MIP
B.NAT-src with no DIP
C.Interface-based translation
D.NAT-src with a DIP, fixed-port disabled
Answer: BC
Juniper dumps JN0-521 JN0-521 certification training JN0-521 certification
NO.6 Which type of NAT is performed when you implement interface-based NAT?
A.source IP address translation
B.destination IP address translation
C.source IP and port address translation
D.destination IP and port address translation
Answer: C
Juniper demo JN0-521 JN0-521 JN0-521 JN0-521 JN0-521 exam prep
NO.7 Which statement is correct regarding administrator privileges?
A.Any administrator can change their privileges on an as-needed basis.
B.Administrator privileges can only be established and changed by the root administrator.
C.Administrator privileges can be established and changed by the root and all-privilege administrator.
D.Administrator privileges can only be established by the root and can be changed by the root and
all-privilege administrator.
Answer: B
Juniper original questions JN0-521 practice test JN0-521 exam simulations JN0-521 JN0-521 certification
NO.8 By default, from which hardware component is the startup copy of the ScreenOS loaded?
A.NVRAM
B.TFTP server
C.internal flash
D.PCMCIA card
Answer: C
Juniper JN0-521 JN0-521 JN0-521 JN0-521 certification
NO.9 What is the purpose of the "Permitted IP" address on a ScreenOS device?
A.It defines a list of addresses that are trusted to perform management on the ScreenOS device.
B.It is used in policy rules to determine which user traffic is allowed through the ScreenOS device.
C.It defines which range of addresses that can access devices connected to the ScreenOS device.
D.It is the address that an external device uses to gain management access to a ScreenOS device.
Answer: A
Juniper exam simulations JN0-521 JN0-521 dumps JN0-521 answers real questions JN0-521
NO.10 What is the purpose of the VLAN1 interface?
A.It provides policy-based NAT for 802.1Q VLANs.
B.It provides an interface that can be used with 802.1Q VLANs in transparent mode.
C.It provides the ScreenOS device with a routable IP address while operating in route mode.
D.It provides an interface that can be used to remotely manage the ScreenOS device while operating in
transparent mode.
Answer: D
Juniper JN0-521 JN0-521 test answers JN0-521 exam simulations
NO.11 When changes are made to the running config during a WebUI management session, to what external
hardware component can the changes be saved?
A.FTP server
B.TFTP server
C.PC local disk
D.Compact Flash Card
Answer: C
Juniper exam simulations JN0-521 JN0-521 demo JN0-521 study guide
NO.12 When a firewall receives the first packet in a series, what will it immediately do?
A.Check its route table.
B.Check its session table.
C.Determine if traffic is crossing zones.
D.Verify that it is not malformed or a fragment.
Answer: D
Juniper braindump JN0-521 JN0-521 JN0-521
NO.13 Which process describes how an addressed physical interface is moved into a Layer 2 zone?
A.Place the required interface into the VLAN zone.
B.Place the required interface into L2 zones such as V1-Trust, V1-Untrust
C.Remove the interface from the L3 zone such as Trust and place it into a L2 zone such as V1-Trust
D.Remove the address from the interface, remove the interface from the L3 zone, and then place
interface in the L2 zone.
Answer: D
Juniper JN0-521 JN0-521 questions
NO.14 You are looking at the event log of the responding device and it says,
"Rejected an initial Phase 1 packet from an unrecognized peer gateway"
What are three likely reasons for the failure? (Choose three.)
A.The peer ID is misconfigured.
B.The default gateway is missing.
C.The preshare keys are mismatched.
D.The gateway address is misconfigured.
E.The outgoing interface is misconfigured.
Answer: ADE
Juniper exam JN0-521 JN0-521 JN0-521 test answers JN0-521 pdf
NO.15 In the packet forwarding decision process, how is the second packet handled differently than the first
in a series of allowed interzone packets?
A.The second packet causes an ARP query.
B.The second packet is checked against the policy table.
C.The second packet is forwarded without a sanity check.
D.The second packet is forwarded without checking the route table.
Answer: D
Juniper JN0-521 JN0-521 test answers JN0-521 exam prep JN0-521 pdf JN0-521
NO.16 Which two statements are true in regards to a ScreenOS firewall in transparent mode? (Choose two.)
A.VPNs can terminate to the VLAN1 interface IP address.
B.Static routes must be configured if multiple virtual routers are going to be used.
C.It can be installed in a network without the requirement to reconfigure IP addressing schemes.
D.You must use the console port to manage the device as you cannot manage the device using an
Ethernet port.
Answer: AC
Juniper JN0-521 questions JN0-521 JN0-521 JN0-521
NO.17 When managing a ScreenOS device using the WebUI and performing an image upgrade, from which
hardware component will the ScreenOS image be loaded?
A.TFTP server
B.PC local disk
C.internal flash
D.Compact Flash Card
Answer: B
Juniper JN0-521 JN0-521 pdf JN0-521 JN0-521 certification training
NO.18 Which ScreenOS WebUI button reorders policies?
A.Shift
B.Move
C.Reorder
D.Transfer
Answer: B
Juniper JN0-521 test JN0-521 JN0-521 original questions JN0-521 test answers
NO.19 A ScreenOS firewall has the correct interfaces addressed and active. A policy is written allowing
interzone FTP traffic from a directly connected client. But the traffic does not cross the firewall from the
client to the server.
What is the most likely problem with the firewall?
A.The ScreenOS firewall has no physical connection to the FTP server.
B.The ALG option on the ScreenOS firewall has not been enabled for FTP traffic.
C.The ScreenOS firewall does not have a route defined to the FTP servers' subnet.
D.The ScreenOS firewall does not have a route defined to the FTP clients subnet.
Answer: C
Juniper JN0-521 test JN0-521 JN0-521 JN0-521 exam simulations
NO.20 Which statement accurately describes the "config rollback" feature?
A.Once the "config rollback" feature is enabled, it allows the administrator to re-apply a previously saved
configuration file from flash.
B.The "config rollback" feature is enabled by default, it allows the administrator to re-apply a previously
saved configuration file from flash.
C.Once the "config rollback" feature is enabled, it allows the administrator to re-apply a locked
configuration file from a separate area in flash.
D.Once the "config rollback" feature is enabled, it allows the administrator to revert to the prior ScreenOS
image or configuration file in the event an upgrade operation aborts.
Answer: C
Juniper JN0-521 JN0-521 JN0-521 braindump
NO.21 What are two benefits of configuring a ScreenOS device in transparent mode? (Choose two.)
A.There is no need to reconfigure the IP addresses of routers or protected servers.
B.There is no need to create MIPs or VIPs for incoming traffic to reach protected servers.
C.Policies are easier to create since you do not have to include source and destination IP addresses.
D.The product can support more VPNs and obtain greater throughput because there is less overhead to
manage.
Answer: AB
Juniper JN0-521 JN0-521
NO.22 What will change the root admin password?
A.set admin password
B.set root-admin password
C.set admin password
D.set admin user password
Answer: A
Juniper exam dumps JN0-521 JN0-521 exam dumps JN0-521 questions JN0-521 certification training JN0-521
NO.23 You are configuring an interface in the untrust zone with an IP address, telnet enabled, and WebUI
management.
Which sequence of steps must be performed to make the interface operational at the end of the
configuration sequence?
A.Assign the interface to a zone, define the IP address, enable Web and telnet services.
B.Assign the interface to a zone, define the IP address, accept default management services.
C.Assign the interface to a virtual router, define the IP address, enable Web and telnet services.
D.Assign the interface to a zone, define the IP address, define a manage IP address, accept default
management services.
Answer: A
Juniper questions JN0-521 JN0-521 JN0-521 certification JN0-521 exam simulations JN0-521
NO.24 Telnet management has been enabled on an interface in the untrust zone.
What else should be completed to limit telnet access to the ScreenOS device from trusted management
PCs?
A.Define a permitted IP address.
B.Define a policy from trust to untrust.
C.Define a trusted IP in the address table.
D.Define a manage IP address on this interface.
Answer: A
Juniper JN0-521 JN0-521 JN0-521
NO.25 An operational firewall needs a configuration loaded and executed while it is passing user data.
Which CLI command will perform this process without interrupting traffic?
A.save config from tftp 1.1.7.250 15June06.cfg to flash
B.save config from tftp 1.1.7.250 15June06.cfg to ram
C.save config from tftp 1.1.7.250 15June06.cfg merge
D.save config from tftp 1.1.7.250 15June06.cfg to flash
Answer: C
Juniper dumps JN0-521 JN0-521 exam prep JN0-521 JN0-521
NO.26 What is the purpose of the "Manage-IP" address on a ScreenOS device?
A.It defines a list of addresses that are trusted to perform management on the ScreenOS device.
B.It is used in policy rules to determine which device is allowed to manage the ScreenOS device.
C.It is the address that an external device uses to gain management access to a ScreenOS device.
D.It defines a list of device addresses that can manage the ScreenOS device without being authenticated
prior to session establishment.
Answer: C
Juniper JN0-521 JN0-521 pdf JN0-521 questions JN0-521 exam simulations JN0-521 exam
NO.27 Which command is used when configuring web management on the VLAN1 interface for a client
connected to an e3 interface in the DMZ zone?
A.set int eth3 manage web
B.set zone v1-dmz manage web
C.set int dmz zone manage web
D.set int VLAN1 zone dmz manage web
Answer: B
Juniper exam dumps JN0-521 JN0-521 JN0-521 test answers
NO.28 Click the Exhibit button.
In the exhibit, which interface would be used to forward traffic to host 1.1.7.5?
A.e0/1
B.e0/2
C.e0/3
D.e0/4
Answer: C
Juniper pdf JN0-521 JN0-521 certification training
NO.29 A ScreenOS firewall is running in transparent mode. The firewall receives a packet which has no entry
in its forwarding table.
What will the firewall do?
A.Flood out all ports.
B.Check its route table for interzone destination.
C.Perform a policy lookup to determine the interfaces to which the source address is permitted, and flood
the packet out of those interfaces.
D.Perform a policy lookup to determine the zones to which the source address is permitted, and flood the
packet out the interfaces bound to those zones.
Answer: D
Juniper original questions JN0-521 JN0-521 exam JN0-521 practice test
NO.30 By default, where are changes stored when a save command is issued from the CLI during a
management session?
A.NVRAM
B.internal flash
C.PCMCIA card
D.Compact Flash Card
Answer: B
Juniper certification JN0-521 JN0-521
ITCertKing offer the latest 644-068 exam material and high-quality 000-540 pdf questions & answers. Our MB6-870 VCE testing engine and 70-410 study guide can help you pass the real exam. High-quality 642-385 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.itcertking.com/JN0-521_exam.html
没有评论:
发表评论