EMC certification E20-547 exam best training materials

In order to pass EMC certification E20-547 exam, selecting the appropriate training tools is very necessary. And professional study materials about EMC certification E20-547 exam is a very important part. Our ITCertKing can have a good and quick provide of professional study materials about EMC certification E20-547 exam. Our ITCertKing IT experts are very experienced and their study materials are very close to the actual exam questions, almost the same. ITCertKing is a convenient website specifically for people who want to take the certification exams, which can effectively help the candidates to pass the exam.

ITCertKing is a website that specializes in providing IT exam information. The pass rate can achieve 100%. Which is one of the reasons that most candidates willing to believe the ITCertKing. ITCertKing have been always concerned about the needs of the majority of candidates. We always with the greatest ability to meet the needs of the candidates . ITCertKing's EMC E20-547 exam training materials is an unprecedented IT certification training materials. With it, your future career will be rain or shine.

ITCertKing EMC E20-547 exam information are cheap and fine. We use simulation questions and answers dedication to our candidates with ultra-low price and high quality . We sincerely hope that you can pass the exam. We provide you with a convenient online service to resolve any questions about EMC E20-547 exam questions for you.

Only to find ways to success, do not make excuses for failure. To pass the EMC E20-547 exam, in fact, is not so difficult, the key is what method you use. ITCertKing's EMC E20-547 exam training materials is a good choice. It will help us to pass the exam successfully. This is the best shortcut to success. Everyone has the potential to succeed, the key is what kind of choice you have.

Exam Code: E20-547
Exam Name: EMC (VNX Solutions Specialist Exam for Storage Administrators )
One year free update, No help, Full refund!
Total Q&A: 203 Questions and Answers
Last Update: 2013-12-01

E20-547 Free Demo Download: http://www.itcertking.com/E20-547_exam.html

NO.1 Which Unisphere storage role will limit a user to the administration of the file system checkpoints, LUN
mirrors, and replication manager tasks?
A. Data recovery
B. Administration
C. Data protection
D. NAS administrator
Answer: C

EMC   E20-547   E20-547

NO.2 What happens when a reverse synchronization completes without Protected Restore Mode enabled?
A. Only the reverse-synchronized clone remains unfractured
B. Host writes to the source LUN are not mirrored to clone
C. The gold copy clone used for restore will remain as is
D. All clones will be fractured
Answer: B

EMC   E20-547   E20-547   E20-547 demo   E20-547   E20-547 test answers

NO.3 If a source LUN is trespassed, what happens to a fractured cloned LUN?
A. The peer SP acquires the feature logs
B. The peer SP acquires the clone LUN
C. The peer SP acquires both the clone LUN and the feature logs
D. Neither the clone LUN nor the feature logs will be acquired by the peer SP
Answer: C

EMC   E20-547 pdf   E20-547 questions

NO.4 After presenting a LUN to a Linux host, which utility is used to configure a partition?
A. fdisk
B. Unisphere Server Utility
C. Unisphere Service Manager
D. Disk Management
Answer: A

EMC   E20-547 original questions   E20-547

NO.5 What is the preferred method for partitioning VNX FC LUNs attached to a Windows Server 2008 R2
host?
A. Disk Management
B. fdisk
C. format
D. vtoc
Answer: A

EMC dumps   E20-547 certification   E20-547 original questions

NO.6 What does the acronym "CHAP" refer to?
A. Challenge Handshake Authentication Protocol
B. Challenge Handshake Authorization Protocol
C. CLARiiON Handshake Authentication
D. Consistent Host Application Protocol
Answer: A

EMC   E20-547   E20-547 test answers   E20-547

NO.7 When performing switch maintenance, a customer accidentally disconnects all network connections to
an active VNX Data Mover
How does VNX handle this situation?
A. The primary Data Mover remains active
B. The VNX always notifies EMC Customer Service of the problem
C. The active Data Mover immediately fails over
D. The active Data Mover fails over after 30 seconds of lost connectivity
Answer: A

EMC   E20-547   E20-547 certification training

NO.8 Which Linux kernel supports dynamic LUN scanning?
A. 2.3
B. 2.4
C. 2.5
D. 2.6
Answer: D

EMC   E20-547   E20-547   E20-547 exam dumps

NO.9 What is the CLI command to enable Access Logix?
A. naviseccli -h <SP_name> storagegroup -enable
B. naviseccli -h <SP_name> accesslogix -enable
C. naviseccli -h <SP_name> storagegroup -on
D. naviseccli -h <SP_name> accesslogix -on
Answer: B

EMC   E20-547   E20-547

NO.10 What will prevent a storage administrator from deleting a storage group?
A. The presence of LUNs in the storage group
B. The presence of MirrorView target LUNs in the storage group
C. The presence of MirrorView source LUNs in the storage group
D. The presence of hosts in the storage group
Answer: D

EMC exam dumps   E20-547   E20-547

NO.11 Which RecoverPoint configuration details can be presented in report format when using Data Protection
Advisor.?
A. RPA configuration changes
B. Replication sets
C. Replication lag
D. Link state change
Answer: C

EMC   E20-547 pdf   E20-547   E20-547 certification training   E20-547

NO.12 Which Unisphere wizard can automatically allocate all available disk storage and present it as private
LUNs?
A. Backend Bus Reset Wizard
B. File System Wizard
C. Disk Provisioning Wizard for File
D. Celera Setup Wizard
Answer: C

EMC   E20-547   E20-547   E20-547

NO.13 A file system has auto_extend enabled. If the file system size is greater than the extend_size value.
What will happen when the file system reaches its HWM?
A. The file system will not be extended
B. The extend size value cannot by less than the die system size
C. The file system is extended by the extend_size value
D. The file system is extended by five percent of its size
Answer: D

EMC test   E20-547 test answers   E20-547 dumps   E20-547 certification

NO.14 Which failover mode must be configured to use vStorage APIs for Array Integration (VAAI)
functionality?
A. 0
B. 1
C. 2
D. 4
Answer: D

EMC practice test   E20-547 study guide   E20-547 answers real questions   E20-547

NO.15 At which RAID level are FAST Cache drives configured for VNX arrays?
A. RAID 0
B. RAID 1
C. RAID 3
D. RAID 5
Answer: B

EMC   E20-547   E20-547 certification   E20-547 pdf

NO.16 In a VNX series array, how does FAST manage data in a heterogeneous storage pool?
A. It relocates LUNs from one tier to another to improve performance.
B. It relocates more active data to faster drives and less active data to slower drives.
C. It relocates more active data from tier 1storage without users noticing the difference.
D. It acts as an application accelerator and relocates LUNs based on performance.
Answer: B

EMC certification   E20-547 answers real questions   E20-547   E20-547 dumps

NO.17 An administrator tries to modify the quota settings on a CIFS share from a windows server 2003 host,
but the quota tab does not exist in the network drive properties. What could be a possible cause?
A. Exporting is implemented at the file system subdirectory level on VNX OE for File.
B. The user does not have administrator privileges on this share.
C. Quotas can be managed only with Windows Server 2008.
D. Windows users cannot modify the quota settings.
Answer: A

EMC   E20-547 test questions   E20-547 demo   E20-547

NO.18 How many storage groups can a host belong to in an array?
A. 1
B. 2
C. 4
D. 6
Answer: A

EMC braindump   E20-547   E20-547   E20-547 braindump   E20-547   E20-547 exam simulations

NO.19 What happens when a new CFS share is created using Unisphere and all available CIFS server check
boxes remain unchecked?
A. The VNX system prompts for selection of at least one CFS server
B. A global share Is created and served by the primary VDM
C. A global share is created and served by all CIFS servers residing on the Data Mover
D. None of the CIFS servers residing on the Data Mover serve the newly created share
Answer: D

EMC   E20-547 original questions   E20-547 exam simulations

NO.20 Which criterion must be met before executing the storage pool -destroy command with Navisphere
secure CLI.
A. Complete removal of all LUNs from the pool
B. Complete removal of unused LUNs from the pool
C. Complete removal of large LUNs from the pool
D. Complete removal of empty LUNs from the pool
Answer: A

EMC   E20-547   E20-547 certification

ITCertKing offer the latest MB5-854 exam material and high-quality FCNSA.v5 pdf questions & answers. Our VCAD510 VCE testing engine and 000-456 study guide can help you pass the real exam. High-quality 70-462 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/E20-547_exam.html