Having HP certification HP0-J39 exam certificate is equivalent to your life with a new milestone and the work will be greatly improved. I believe that everyone in the IT area is eager to have it. A lot of people in the discussion said that such a good certificate is difficult to pass and actually the pass rate is quite low. Not having done any efforts of preparation is not easy to pass, after all, HP certification HP0-J39 exam requires excellent expertise. Our ITCertKing is a website that can provide you with a shortcut to pass HP certification HP0-J39 exam. ITCertKing have a training tools of HP certification HP0-J39 exam which can ensure you pass HP certification HP0-J39 exam and gain certificate, but also can help you save a lot of time. Such a ITCertKing that help you gain such a valuable certificate with less time and less money is very cost-effective for you.
Someone asked, where is success? Then I tell you, success is in ITCertKing. Select ITCertKing is to choose success. ITCertKing's HP HP0-J39 exam training materials can help all candidates to pass the IT certification exam. Through the use of a lot of candidates, ITCertKing's HP HP0-J39 exam training materials is get a great response aroud candidates, and to establish a good reputation. This is turn out that select ITCertKing's HP HP0-J39 exam training materials is to choose success.
Exam Code: HP0-J39
Exam Name: HP (Designing and Implementing HP P4000 SAN Solutions)
One year free update, No help, Full refund!
Total Q&A: 145 Questions and Answers
Last Update: 2013-10-15
From ITCertKing website you can free download part of ITCertKing's latest HP certification HP0-J39 exam practice questions and answers as a free try, and it will not let you down. ITCertKing latest HP certification HP0-J39 exam practice questions and answers and real exam questions is very close. You may have also seen on other sites related training materials, but will find their Source ITCertKing of you carefully compare. The ITCertKing provide more comprehensive information, including the current exam questions, with their wealth of experience and knowledge by ITCertKing team of experts to come up against HP certification HP0-J39 exam.
If you choose ITCertKing, success is not far away for you. And soon you can get HP certification HP0-J39 exam certificate. The product of ITCertKing not only can 100% guarantee you to pass the exam, but also can provide you a free one-year update service.
HP0-J39 Free Demo Download: http://www.itcertking.com/HP0-J39_exam.html
NO.1 A design consists of an HP P4000 SAN solution installed across four sites. How many servers running
the central management console are required to manage the solution?
A. 8
B. 4
C. 2
D. 1
Answer: D
HP HP0-J39 HP0-J39 braindump
NO.2 Which HBA and iSCSI initiator combination does the iSCSI protocol support? (Select two.)
A. iSCSI HBA with TCP offload engine (TOE)
B. softwareiSCSI initiator with Fibre Channel HBA
C. softwareiSCSI initiator with InfiniBand HBA
D. iSCSI Fibre Channel HBA with TCP TOE software iSCSI initiator
E. softwareiSCSI initiator with NIC
Answer: A,E
HP HP0-J39 certification HP0-J39 practice test HP0-J39 HP0-J39
NO.3 Which instance is responsible for access control?
A. cluster
B. server
C. management group
D. volume
Answer: B
HP demo HP0-J39 test questions HP0-J39 HP0-J39 HP0-J39 HP0-J39
NO.4 At which level in HP P4000 SAN solutions is RAID configured?
A. storage node
B. volume
C. management group
D. cluster
Answer: A
HP test questions HP0-J39 HP0-J39 HP0-J39 pdf
NO.5 What are the correct steps to create a remote copy on a P4000 G2?
A. Create the remote volume and link it to the primary volume, copy the data.
B. Create the primary volume, create the remote volume and link it to the primary volume, copy the data.
C. Create the remote volume andsnapshot, link the primary volume to the remote snapshot, copy the
data.
D. Create the primary snapshot, create the remote volume and snapshot, link it to the primary
snapshot,copy the data.
Answer: D
HP test answers HP0-J39 exam HP0-J39 exam prep HP0-J39 HP0-J39
NO.6 What is the recommended network latency on a multi-site SAN subnet?
A. below 2 ms
B. below 5 ms
C. below 9 ms
D. below 15 ms
Answer: A
HP HP0-J39 HP0-J39 test questions HP0-J39
NO.7 Which statements about HP P4000 SAN Network RAID levels are correct? (Select three.)
A. Copies are located on different clusters.
B. Redundant copies of blocks reside on different storage nodes.
C. Performance improves as the number of copies increases.
D. Up to four copies can be created.
E. The Network RAID level is defined per storage node.
F. The number of storage nodes in the cluster can limit the Network RAID level.
Answer: B,D,F
HP practice test HP0-J39 HP0-J39 HP0-J39
NO.8 Which benefit does a virtual IP load balancing (VIPLB) initiator provide?
A. directsiSCSI communication to the least busy storage module
B. supports simultaneousiSCSI communication with multiple storage modules
C. selects the next storage module in the list foriSCSI communication
D. prefers the fastest connection foriSCSI communication
Answer: A
HP HP0-J39 HP0-J39 HP0-J39
NO.9 What are potential purposes to utilize snapshots? (Select two.)
A. to restore files without tape or backup software
B. to protect against unintended manual data deletion
C. to protect against disk failures
D. to protect against multiple hardware failures
E. to prevent sensitive data from modification
Answer: A,B
HP HP0-J39 test HP0-J39 HP0-J39
NO.10 What is a major enhancement of SAN/iQ 8.5 over SAN/iQ 8.1?
A. Network RAID 1 and 10
B. Network RAID 5 and 6
C. application-managed snapshots
D. thin provisionedSmartClone
Answer: B
HP HP0-J39 test answers HP0-J39 HP0-J39 demo HP0-J39 questions HP0-J39
NO.11 How does the HP P4000 SAN solution allow aggregate application performance to be increased when
capacity is added?
A. Capacity and performance are adjusted on a linear scale.
B. Application priority can be adjusted.
C. Capacity and performance are dynamically adjusted to maintain balance.
D. Capacity and performance are balanced through the configuration of expansion modules.
Answer: A
HP braindump HP0-J39 exam HP0-J39 HP0-J39 test answers HP0-J39 questions
NO.12 Which statements about remote copies are correct? (Select two.)
A. Remote copiescan not be mounted.
B. Remote copies are always thin provisioned.
C. Remote copies are asynchronous replicas of a volume.
D. Remote copies can be synchronous and asynchronous.
E. Remote copies are asynchronous replicas between different clusters.
Answer: B,C
HP HP0-J39 certification HP0-J39
NO.13 What are characteristics of device specific module MPIO (DSM MPIO)? (Select two.)
A. DSM MPIO redirectsiSCSI communication to the least busy storage node.
B. DSM MPIO communication offers better performance than non-DSM MPIO communication.
C. DSM MPIO is available for all operating systems withiSCSI support.
D. DSM MPIO provides the servers with the data mapping of each node.
E. DSM MPIO provides a set of built-in data transport security features.
Answer: B,D
HP HP0-J39 practice test HP0-J39 exam HP0-J39 HP0-J39 exam prep
NO.14 Click the Exhibit button. Which network protocol should be enabled when using ProCurve switches in an
iSCSI storage network?
A. Mesh Protocol
B. Simple Loop Prevention Protocol
C. Rapid Spanning Tree Protocol
D. Point-to-Point Protocol
Answer: C
HP exam simulations HP0-J39 braindump HP0-J39 HP0-J39
NO.15 Which operating systems does the HP P4000 SAN solution support? (Select three.)
A. Solaris 9
B. OS X Leopard 10.5.5
C. HP OpenVMS 8.3
D. Novell NetWare 6.5
E. SUSE Linux Enterprise Server 10
Answer: B,D,E
HP HP0-J39 certification training HP0-J39 HP0-J39
ITCertKing offer the latest LOT-927 exam material and high-quality 000-225 pdf questions & answers. Our JN0-694 VCE testing engine and C_HANATEC_1 study guide can help you pass the real exam. High-quality JN0-730 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.itcertking.com/HP0-J39_exam.html
没有评论:
发表评论