Juniper JN0-694 training and testing

If you attend Juniper certification JN0-694 exams, your choosing ITCertKing is to choose success! I wish you good luck.

When we started offering Juniper JN0-694 exam questions and answers and exam simulator, we did not think that we will get such a big reputation. What we are doing now is incredible form of a guarantee. ITCertKing guarantee passing rate of 100%, you use your Juniper JN0-694 exam to try our Juniper JN0-694 training products, this is correct, we can guarantee your success.

Through the feedback of many examinees who have used ITCertKing's training program to pass some IT certification exams, it proves that using ITCertKing's products to pass IT certification exams is very easy. Recently, ITCertKing has developed the newest training solutions about the popular Juniper certification JN0-694 exam, including some pertinent simulation tests that will help you consolidate related knowledge and let you be well ready for Juniper certification JN0-694 exam.

Exam Code: JN0-694
Exam Name: Juniper (Enterprise Routing and Switching Support, Professional (JNCSP-ENT))
One year free update, No help, Full refund!
Total Q&A: 36 Questions and Answers
Last Update: 2013-09-24

As long as you need the exam, we can update the Juniper certification JN0-694 exam training materials to meet your examination needs. ITCertKing's training materials contain many practice questions and answers about Juniper JN0-694 and they can 100% ensure you pass Juniper JN0-694 exam. With the training materials we provide, you can take a better preparation for the exam. And we will also provide you a year free update service.

JN0-694 Free Demo Download: http://www.itcertking.com/JN0-694_exam.html

NO.1 You are implementing Q-in-Q tunneling on an EX Series switch. You want the tunnel to support
all C-VLANs; however, only some VLANs are able to send traffic across the tunnel.
Switch-1 has the following configuration:
[edit vlans]
user@Switch-1# show
v100 {
vlan-id 100;
interface {
ge-0/ 0/ 0.10;
ge-0/ 0/1.20;
}
dot1q-tunneling {
customer-vlans [ ];
}
}
What would solve this problem?
A. Add family ethernet-switching to the tunnel-side interface on Switch-1.
B. Implement RSTP .
C. Q-in-Q tunneling will not work in this scenario; use a Layer 2 VPN instead.
D. Remove the customer-vlans statement.
Answer: C

Juniper   JN0-694 test questions   JN0-694 exam simulations   JN0-694 certification   JN0-694 braindump

NO.2 You observe that a router is using an unusually high amount of CPU cycles.
You determine that continuous SPF calculations in OSPF are being performed.
What are two reasons for this problem? (Choose two.)
A. The wrong authentication keys between the OSPF neighbors are used.
B. The interface MTU is mismatched between the OSPF neighbors.
C. There are duplicate router IDs within the OSPF area.
D. An OSPF adjacency is flapping.
Answer: C,D

Juniper   JN0-694   JN0-694 test questions   JN0-694   JN0-694

NO.3 Your Junos device is dropping certain traffic flows, while allowing other traffic flows to pass
through the device unaffected.
Which CoS component is causing this problem?
A. BA classification
B. RED
C. MF classification
D. Rewrite rules
Answer: D

Juniper   JN0-694   JN0-694 practice test   JN0-694

NO.4 You are troubleshooting a problem where an OSPF adjacency between two neighboring
routers will not form.
What are two reasons for this problem? (Choose two.)
A. One or both of the connected interfaces are missing the family inet statement.
B. One or both of the connected interfaces are missing the family iso statement.
C. The connected interfaces are not on the same subnet.
D. Another IGP is running on one or both of the routers, overriding OSPF.
Answer: B,D

Juniper   JN0-694 certification training   JN0-694

NO.5 Your switch is experiencing a problem where a port that should have only one host connected
occasionally shows that multiple MAC addresses are being learned.
Which configuration setting would ensure that no extra hosts can join the network using this switch
port?
A. mac-limit
B. no-mac-learning
C. persistent-learning
D. bpdu-block-on-edge
Answer: D

Juniper exam dumps   JN0-694 practice test   JN0-694 practice test   JN0-694 study guide   JN0-694

NO.6 Two neighboring routers are able to form an OSPF adjacency, but are not able to establish an
IBGP neighborship.
What are two reasons for the IBGP neighborship problem? (Choose two.)
A. One of the devices has a misconfigured BGP peer address.
B. One or both of the connected interfaces are missing the family iso statement.
C. OSPF has a lower route preference than BGP .
D. A firewall filter on one of the interfaces is blocking TCP traffic.
Answer: B,C

Juniper exam   JN0-694 dumps   JN0-694   JN0-694

NO.7 Your Layer 2 network uses VLAN IDs 100 through 400 and you are required to load-balance
these VLANs between two different root bridges. You are currently using the default RSTP settings
and notice that all VLANs are using the same root bridge.
How do you ensure the VLANs are load-balanced between two root bridges?
A. Configure MSTP with two MSTI regions and split the VLAN range between them.
B. Configure VSTP with two VLAN groups and split the VLAN range between them.
C. Configure two RSTP instances and split the VLAN range between them.
D. Configure STP and RSTP and split the VLAN range between them.
Answer: A

Juniper braindump   JN0-694   JN0-694 pdf

NO.8 You are having problems redistributing RIP routes into OSPF. Your Junos device has the
following configuration:
[edit protocols ospf]
user@router# show
import my-policy;
area 0.0.0.0 {
interface ge-0/ 0/ 0.0;
interface ge-0/ 0/ ;
interface ge-0/ 0/ {
passive;
}
}
What would resolve the problem?
A. Apply my-policy as an export policy under the [edit protocols rip] hierarchy.
B. Apply my-policy as an import policy under the [edit protocols rip] hierarchy.
C. Apply my-policy as an export policy under the [edit protocols ospf] hierarchy.
D. Use the area-range parameter instead of a routing policy.
Answer: D

Juniper test questions   JN0-694   JN0-694   JN0-694   JN0-694 pdf

ITCertKing offer the latest HH0-050 exam material and high-quality HP2-E56 pdf questions & answers. Our MB6-871 VCE testing engine and 70-482 study guide can help you pass the real exam. High-quality LOT-440 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/JN0-694_exam.html